High Efficiency Solid‐State Dye‐Sensitized Solar Cells Assembled with Hierarchical Anatase Pine Tree‐like TiO2 Nanotubes

A facile and effective method to prepare hierarchical pine tree‐like TiO₂ nanotube (PTT) arrays with an anatase phase directly grown on a transparent conducting oxide substrate via a one‐step hydrothermal reaction. The PTT arrays consist of a vertically oriented long nanotube (NT) stem and a large number of short nanorod (NR) branches. Various PTT morphologies are obtained by adjusting the water/diethylene glycol ratio. The diameter of the NTs and the size of the NR branches decreases from 300 to100 nm and from 430 to 230 nm, respectively, with increasing water content. The length of the PTT arrays could be increased up to 19 μm to significantly improve the charge transport and specific surface area. The solid‐state dye‐sensitized solar cells (ssDSSC) assembled with the 19 μm long PTT arrays exhibit an outstanding energy‐conversion efficiency of 8.0% at 100 mW/cm², which is two‐fold higher than that of commercially available paste (4.0%) and one of the highest values obtained for N719 dye‐based ssDSSCs. The high performance is attributed to the larger surface area, improved electron transport, and reduced electrolyte/electrode interfacial resistance, resulting from the one‐dimensional, well‐aligned structure with a high porosity and large pores.     

The nonstoichiometry and physical properties of the Nd1−x Ca1+x FeO4−y system

The solid solutions of the Nd_1–x Ca_1+x FeO_4–y system for compositions ofx=0.000,0.125, 0.250,0.375, and 0.500 are prepared by drip pyrolysis. XRD analysis shows all the solid solutions are tetragonal I_4/mmm. The Fe⁴⁺ ratio to the total Fe ions or value has a maximum for the compositionx=0.375. From the X-ray powder diffraction analysis and the Mössbauer spectroscopy, the distortion and symmetry change of oxygen octahedra of Fe ions are observed. The structural change of oxygen octahedra of Fe ions strongly affects the physical properties. The solid solution whenx=0.000 shows a weak ferromagnetic behaviour due to the spin canting of the distorted octahedra. The other solid solutions withx=0.125, 0.250, 0.375, and 0.500 show a paramagnetic behaviour over room temperature. The decrease of the magnetic transition temperature is due to the distortion of oxygen octahedra of Fe ions and the existence of the Fe⁴⁺ ion. The formation site of oxygen vacancies plays an important role in the conductivity of the Nd_1–x Ca_1+x FeO_4–y system. Although the oxygen vacancies in [Nd, Ca]-O layer have little effect on conductivity, the oxygen vacancies in the FeO₂ plane of the perovskite layer act as electron trapping sites and thus increase the activation energy.     

Proteomic Analysis Reveals PGAM1 Altering cis‐9, trans‐11 Conjugated Linoleic Acid Synthesis in Bovine Mammary Gland

cis‐9, trans‐11 Conjugated linoleic acid (CLA) is one of the most extensively studied CLA isomers due to its multiple isomer‐specific effects. However, the molecular mechanisms of cis‐9,trans‐11 CLA synthesis in ruminant mammary gland are still not clearly understood. This process may be mediated, to a certain extent, by trans‐11 C18:1 regulated by stearoyl‐CoA desaturase‐1 (SCD1) and/or its syntrophic proteins. This study aimed to investigate the effects of TVA on SCD1‐mediated cis‐9,trans‐11 CLA synthesis in MAC‐T cells and its potential molecular mechanism. Results showed that trans‐11 C18:1 was continually taken up and converted into cis‐9,trans‐11 CLA in MAC‐T cells during the 4‐h incubation of 50 μM trans‐11 C18:1. SCD1 protein expression increased more than twofold at 2 h (P < 0.01) and 2.5 h (P < 0.05) before decreasing to less than half of the normal level at 4 h (P < 0.05). One up‐regulated (RAS guanyl releasing protein 4 isoform 1 [RASGRP4]) and six down‐regulated proteins (glucosamine‐6‐phosphate deaminase 1 [GNPDA1], triosephosphate isomerase [TPI1], phosphoglycerate mutase 1 [PGAM1], heat shock protein beta‐1 [HSPB1], annexin A3 [ANXA3], thiopurine S‐methyltransferase [TPMT]) were found in MAC‐T cells treated with trans‐11 C18:1. Of these seven identified proteins, the presence of GNPDA1 and PGAM1 was verified in several models. More trans‐11 C18:1 was taken up after PGAM1 knockdown by small interfering RNA (siRNA). In conclusion, our data suggested that PGAM1 may have a negative relationship with SCD1 and seemed to be involved in cis‐9, trans‐11 CLA synthesis by facilitating the absorption of trans‐11 C18:1 in the bovine mammary gland.     

An experimental and numerical study on an inherent capacity modulated linear compressor for home refrigerators

Linear compressors are built based on a free piston system and usually require stroke controllers, since the piston movement is sensitive to the ambient temperature. This paper presents a novel design method for an inherent capacity modulated linear compressor that uses R600a for application in household refrigerators. The compressor is capable of modulating its capacity independently, and this feature secures stable and efficient operation without requiring stroke controllers. Electrical parameters are designed to deliver inherent capacity modulation in accordance with cooling demand variation. Mechanical parameters are tuned to establish an efficient resonance system. A numerical model was developed and a prototype compressor was constructed. The prototype compressor was evaluated over a condensing temperature range of 15-50 °C, which corresponds to an ambient temperature range of 5-43 °C. The simulation results show that the cooling capacity was inherently modulated from 55 to 90% over the ambient temperature range, and the inherent modulation is confirmed 70-90% by the experiment.     

Study on electrical characteristics and reliability of fluorinated HfO2 for HKMG

The dielectric properties and reliability of fluorinated HfO₂ have been studied. The fluorinated HfO₂ dielectric treated by NF₃ plasma showed improved dielectric characteristics but resulted in interfacial layer (IL) regrowth during the fluorine plasma treatment process, which led to an oxide capacitance reduction and poor electrical characteristics. Through the analysis of chemical composition and electrical characteristics, it has been revealed that the Hf-O bonds in HfO₂ layer were converted to Hf-F bonds by the plasma treatment and then the dissociated oxygen diffused to the IL. In order to suppress the IL regrowth, newly fluorinated HfO₂ has been developed. Reliability of fluorinated HfO₂ dielectric was sharply improved without a decrease in the oxide capacitance at fluorine plasma treatment conditions of low power and temperature.     

Natural gas steam reforming for hydrogen production over metal monolith catalyst with efficient heat-transfer

Heat transfer performance of the natural gas (NG) steam reforming in a reactor bed with metal monolith catalyst has been evaluated in comparison with that in the conventional packed bed with pellet catalysts. 2%Ru/Al₂O₃ catalyst with high intrinsic activity has been wash-coated on metal monolith substrates or used as it was for the packed bed application. The prepared metal monolith catalyst has been applied for NG steam reforming to increase heat-transfer efficiency. Under the same degree of temperature gradient from the furnace wall to the catalyst bed, the heat flux obtained in the monolithic bed reactor was about twice higher than that in the packed bed reactor. Maximum heat transfer coefficient achieved in this study for the former was 0.65 kW/m² K, while that for the latter was 0.3 kW/m² K. This is mainly due to enhanced heat-transfer via metal monolith catalyst.     

Beyond Plastics-to-Plastics to Waste-to-Products: Opportunities for Closing the Carbon Cycle via Chemical Recycling

The plastic crisis is a key driver for chemical recycling (CR), with focus placed on plastics circularity via Plastics-to-Plastics. This neglects its potential in enabling circularity for a wide range of carbon-containing waste and hinders a critical discussion of its broader contributions to decarbonizing the chemical sector. To address this gap, four CR routes and their integration in the conventional waste treatment and chemical production value chains are briefly reviewed, and reasons proposed for a focus expansion to Waste-to-Products to realize opportunities for closing the carbon cycle via chemical recycling.     

Towards a Structured Framework for Techno-Economic Analyses of Chemical Recycling Technologies

The role of chemical recycling (CR) as a valuable complementary strategy to mechanical recycling in closing the carbon cycle for carbon-containing waste is currently being discussed in political, economic, and social spheres. However, CR deployment is hindered by uncertainties regarding its environmental impacts and costs compared to conventional waste treatment and chemical production routes. While methods for assessing CR's environmental impacts are the focus of socio-political debates and investigations, techno-economic analyses (TEA) to evaluate costs of CR remain scarce. To contribute to a standardized framework for assessing the economic viability of CR technologies, this article draws on life cycle assessment and TEA literature to develop a six-stage TEA process for CR. A checklist is also presented to support transparent and comprehensive analyses.